1000!!! Thanks very much! :)

1000 subscribers on my youtube channel after 6 and half years! 
:) Thanks everyone for sharing! Special thanks to Didier Desbordes for supporting my work!!!

Rhombic drive VS. My 105° "L" yoke drive system

Hello guys!

It has long been thinking about a solution what modelling the rhombic-drive movement, 

without any complicated manufacturing.

I was sure it's possible!

First I changed the Ross yoke mechanism.

"T" to "L"

:)

Such an interesting alphabetical magic!

After I calculated the shafts positions, and the angles.

Next step was I made a rhombic drive in Solid Works 3D

and saved 90 frames/sec pictures.

I created my mechanism in same frame rated.

Here is the solution how I can see the similar thing also the different things

about this two methods.

If you interested my work click on my youtube channel.

Here is the latest movie, where I can show you this two drive mechanism in a video.

I changed the angle of my "L" shaped yoke last time 90 to 105 degrees,
because the phase angles was better.

What do you think about it?

Thermoacoustic traveling wave engine

I know you are really need to see my new designed Manson or KCE engines, but my life is so complicate actually, so I'm sorry about delay it will coming later a little bit.

But, my friend simi112 (YT nickname) started a series of thermoacoustic engines.

I followed his work and after we discussed the engines, working methods.

Anyway...here is my first designed traveling wave engine nearly Fellow's TAC generator.

Not perfect yet, but it was the second test run.

The design is so simple!

I made some pictures of assembly

As you can see I used first an aluminium tube for the hot side, 

but the first test run finished with a big hole on this tube...:(

After I changed it for a stainless steel hotdog maker's tube.

I'll show you How it's works?! on my next video!

See you soon!

Blade

Teeter, table seesaw Stirling engines

Simple engines for home design, or relax time.

Self-balanced water piston design

Solid piston design with adjustable balance weight

Rotary Manson ( my old ideas)

Hi all,

here is my new post from my old ideas about rotary type Manson engine.

All engines are on my photobucket profile few years ago, but I share these ideas here now.

Closed cycle regenerative rota-Manson with hot side ventillation:

V 2.0 with tube in tube rotary valve:

Tandem type hot side ventillation rota-Manson engine:

Original cycle rota-Manson engine with inside crankshaft (water pump):

Happy New Year!

New drive control units for my beta type Manson engine

Hello guys!

Two weeks yet and I'll start to build my double cylinder, closed air cycle, beta type Manson engine 

in Transylvania.

Woohoo! :)

I'm so excited!

I had thought about the driving system of this engine this entire weekend, and the conclusion was that it would be made with excentric drive.

But I also developed a new "teeter" drive mechanism for an another beta type Manson engine.

I made for you an animated GIF about this drive control unit:

Also here is my other vision the X-drive mechanism especially for my Manson engines:

And another one...

:)

This is a 3D animation what I made with SolidWorks professional.

I'm a beginner and this is my first animated assembly, 

but you can check how does it work.

I used a simple drive unit, it is pretty nice.