Turn your Stirling engine into a car!

Hi there, BLADE is here again!

Today I'll show you a simple method, how you could turn your Stirling engine KIT

to a simple car if you want.

The car's basic is a nice little glass/aluminium body Stirling engine from

Engine DIY

The original Stirling engine has a DC generator with bright LED stripes,

also it could work as a heat pump, if we use the DC generator as a driver motor.

I made few little interesting experiment with this KIT,

so check it out first:

After I've got some e-mail to create something different from the KIT.

I thought about a car.

But I haven't got any toy car wheels, 

so I made it!

The car has soft drink can wheels with rubber ring surface

for a smoother run.

The wheels are great for any other toy car projects too.

I made an instructional tutorial video about the wheels

and included into my Stirling Engine Toy Car video

If you want to buy a Stirling Engine KIT for you

I could give you a 10% coupon code!

Use my link here:

http://bit.ly/2YOv4Wn

My exclusive coupon code for 10% discount: ED-BA

Special thanks to Engine DIY dot com

to support my efforts!

BLADE

Marble Stirling with water piston balancer

Hi folks,

BLADE is here again!

Today I need to show you an old but unique construction from my earlier Stirling engine collection.

I combined the classical marble Stirling engine

and the "ROCKY" style water piston balanced LTD Stirling engine.

It could work as a flip-flop Stirling with marble.

The original picture from this site: http://www.oocities.org/hustierhof/MC_rocky.html

So, my engine is a "marble rocky" Stirling

See You Soon!

BLADE

Magnetic Propulsion Drived Stirling Engine (Video)

Hi folks!

Do you remember my very old Stirling engine driving method?

YEP!

Last weekend I found an old but short video from my first prototype 

magnetic propulsion drived HTD Stirling engine.

That was a big suprise, 

I didn't remember any video from this engine!

:)

But here it is!

It was a bad construction, but it worked 4 full stroke and two other. :)

The engine wasn't cooled, so it wasn't a big suprise.

Share this video, and the driving method too

because it is an open source project!

Non patented driving mechanism!

And I believe the Butterfly effect 
also 
the 100th monkey theorys!

My older post HERE.

See You Soon!

BLADE

My new LTD Stirling with this driving mechanism!
HERE!

Self rotating LTD solar heat engine

Hey guys!

I wondered how viable a rotary heat engine with solar energy only.

The temperature different maximum 3 degrees at the moment what this engine use.

But the engine is working only 1 degrees too!

I was suprised in this afternoon when the sun is goes away from the sunflower engine, but that is works well, but slowly. It was a big suprise!

Outside was hot, so the solution was the radiant heat across the window glass what the engine is absorbed and the room was the "cold" side actually. 

Outside temperature was 38 degrees, the room temperature was 35. 

The engine arms moves slowly and somethimes I measured only 

0.8 degrees different between the sides!!!

Also works with angle.

I made a mimic plastic flower at 45 degrees.

And the full shadded one is a pretty unique:

SUPPORT MY EFFORTS WITH A SIMPLE VIDEO SHARING

or

use my paypal button on my YOUTUBE channel!

THANKS!

See You Soon!

BLADE

New DIY tutorial step by step video for a Solar LTD Puskás teeter heat engine

Hi guys,

I have received a lot of feedback via e-mail:

"How do you build it?"

"I need one, send me the parameters please!"

"Cool! Where is the tutorial video Blade?"

I finished with it last night, so the video is arrived!

Share this instructional video with your friends!

That is the primary help what you can do for me!

THANKS!

:)

Rhombic drive VS. My 105° "L" yoke drive system

Hello guys!

It has long been thinking about a solution what modelling the rhombic-drive movement, 

without any complicated manufacturing.

I was sure it's possible!

First I changed the Ross yoke mechanism.

"T" to "L"

:)

Such an interesting alphabetical magic!

After I calculated the shafts positions, and the angles.

Next step was I made a rhombic drive in Solid Works 3D

and saved 90 frames/sec pictures.

I created my mechanism in same frame rated.

Here is the solution how I can see the similar thing also the different things

about this two methods.

If you interested my work click on my youtube channel.

Here is the latest movie, where I can show you this two drive mechanism in a video.

I changed the angle of my "L" shaped yoke last time 90 to 105 degrees,
because the phase angles was better.

What do you think about it?

Thermoacoustic traveling wave engine

I know you are really need to see my new designed Manson or KCE engines, but my life is so complicate actually, so I'm sorry about delay it will coming later a little bit.

But, my friend simi112 (YT nickname) started a series of thermoacoustic engines.

I followed his work and after we discussed the engines, working methods.

Anyway...here is my first designed traveling wave engine nearly Fellow's TAC generator.

Not perfect yet, but it was the second test run.

The design is so simple!

I made some pictures of assembly

As you can see I used first an aluminium tube for the hot side, 

but the first test run finished with a big hole on this tube...:(

After I changed it for a stainless steel hotdog maker's tube.

I'll show you How it's works?! on my next video!

See you soon!

Blade

Rotary Manson ( my old ideas)

Hi all,

here is my new post from my old ideas about rotary type Manson engine.

All engines are on my photobucket profile few years ago, but I share these ideas here now.

Closed cycle regenerative rota-Manson with hot side ventillation:

V 2.0 with tube in tube rotary valve:

Tandem type hot side ventillation rota-Manson engine:

Original cycle rota-Manson engine with inside crankshaft (water pump):